THE MEWS - PRIVATE APARTMENTS

147 Charles Street West Perth
It is currently Fri Mar 29, 2024 2:20 am

All times are UTC+08:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Wed Nov 30, 2011 12:33 pm 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
The bore pump is losing prime and requires maintenance, the following issues exist:
  • Check valve below pump is not holding water.
  • The seal between the pump shaft and the pump is leaking water.
Attachment:
File comment: Bore Pump
20111128_020041.jpg
20111128_020041.jpg [ 218.84 KiB | Viewed 12066 times ]
Attachment:
File comment: Leak above check valve
20111128_020127.jpg
20111128_020127.jpg [ 178.77 KiB | Viewed 12064 times ]


Top
   
PostPosted: Fri Jan 06, 2012 11:54 pm 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
06/01/2012 : Replaced check valve and piping on suction side of pump. Pump is working , however leaking a large amount of water from the seal around the motor shaft.


Attachments:
medium_20120115_122223.jpg
medium_20120115_122223.jpg [ 97.29 KiB | Viewed 12012 times ]
Top
   
PostPosted: Wed Jan 18, 2012 8:23 pm 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
18/01/2012 : Pump removed from well and sent for repairs.


Attachments:
medium_20120118_171113.jpg
medium_20120118_171113.jpg [ 188.89 KiB | Viewed 12006 times ]
Top
   
PostPosted: Thu Feb 02, 2012 8:44 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
20/01/2012 : Repair company was not able to service the pump as it is too badly corroded. They have suggested replacing with a new pump at a cost of $1200 (not including installation).


Top
   
PostPosted: Thu Feb 02, 2012 8:47 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
30/01/2012 : Pump picked up from repair company.


Top
   
PostPosted: Fri Feb 03, 2012 9:21 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
02/02/2012 : Replace pump packing seal


Attachments:
medium_20120202_174741.jpg
medium_20120202_174741.jpg [ 120.33 KiB | Viewed 11989 times ]
Top
   
PostPosted: Tue Feb 07, 2012 9:11 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
03/02/2012 : Attempted to return the pump to the well.

Whilst in the process of returning the pump to the well I was berated by one of the owners for performing this work. This owner has threatened to report me to "all of the authorities".

Work has ceased on this item for the moment until we can validate the owners concerns.

Saxon


Top
   
PostPosted: Tue Feb 07, 2012 9:15 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
07/02/2012 : I have been checking with authorities and I can find no-one that can confirm there are any permits or licenses required to enter a well or work on a pump, with the exclusion of the electrical connection (which was performed by an electrician)

This particular owner has been troublesome in the past, at one stage physically poking me in the chest whilst yelling about another issue. With this in mind I am no-longer willing to work on the existing pump, so a new pump must be installed (as recommended by the repairer).

The cost of installing a new pump is: $2830.

Saxon


Top
   
PostPosted: Tue Feb 07, 2012 9:22 am 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
Vote: Pump Replacement
/viewtopic.php?t=313


Top
   
PostPosted: Tue Feb 07, 2012 6:48 pm 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
Subject: RE: Bore pump replacement + repairs
Date: Tue, 7 Feb 2012 17:34:13 +0800
From: VIRGIN BORES

Hi Saxon

Thanks for the order.

I confirm we will replace your existing 5HP centrifugal pump with a new 5HP Lowara pump. We will replace the mounting supports at base of well. $3113 incl GST. At this stage it is anticipated we will do this work this coming Friday or Monday. We have ordered the pump.

As discussed I reiterate that we cannot guarantee the state of your borehole “spear” beneath the pump and it’s serviceability or practical lifespan left. Our quotation does not include replacing control equipment or any attendant electrical work required . Our quotation does not include a check valve and if found required it would be at additional cost.

Thanks for the order

Regards


Top
   
PostPosted: Mon Feb 13, 2012 8:36 pm 
Site Admin

Joined: Tue Jan 06, 2009 5:53 pm
Posts: 2701
13/02/2013 : New pump was installed and all stations have been tested and are working ok.

The new pump appears to be delivering noticeably more water to the grounds.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC+08:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited